Concrete & Upcycled Glass Lamps

To form the concrete I used a wire wheel on some pine to expose the profile in the grain. The aluminum pieces are held together by brazing, it’s a sort of aluminum welding, with a installation process more similar to soldering. The plexiglass is held on with silicone caulking. 2-part masonry epoxy is used to hold the frame to the concrete (except for the top which is attached with silicone in case of maintenance). The concrete was finished with a single coat of 2-part epoxy resin. The lighting used is a RGB LED flood light. Both of these are able to be operated off the same remote. Check out the details:

Source: Concrete & Upcycled Glass Lamps

%d bloggers like this: